Slide 0
The slide switch is near the center, right above the JST Battery Jack. There's a little nub you can slide left or right. This switch is connected to digital pin #21. When switched to the left, the value reading is 'high' (thus the + symbol) and when switched right, the value read is 'low' (- symbol).
Slide 0
You can call CircuitPlayground.slideSwitch() to tell you which way the switch is flipped. It will return true if the switch is to the left (+ side) and false if the switch is to the right (- side)
Prod #DescriptionUnitPriceOrder / Quote260500Coverslip w/ 10 x 10 grid of 0.1mm squares at 5 positions. Indexed 1-10 on top and A-J down side.pkg/25$154.00Qty: 260501Coverslip w/ 10 x 10 grid of 1mm squares. Each square indexed 0-99.pkg/25104.50Qty: 260502Coverslip w/ 20 x 20 grid of 0.5mm squares. Indexed 1-20 along top, A-T down side and on center cross.pkg/25101.20Qty: 260510Coverslip w/ 10 x 10 grid of 1mm squares. Each square indexed 0-99, 18mm round.pkg/25148.50Qty: 260511Coverslip w/ 20 x 20 grid of 0.5mm squares. Indexed 1-20 along top, A-T down side and on center cross, 18mm round.pkg/25137.50Qty: Quartz Coverslips Quartz Microscope Slides and Cover Slips are a necessity for microscopy applications where UV transparency is needed. They can also be used for high end microscopy applications to reduce signal los due to absorption. Other application can involve UV radiation transparency. The quartz slides can also be used for high temperature applications up to 1250C (2282F). Above this temperature the material will start to soften. The Quartz material used to manufacturer our high quality quartz microscope slides and cover slips is the GE 124 type high purity fused quartz, a well documented quartz used over decades in microscopy applications.
A rich media is defined here as a video content synchronized with your courseware (slides, pictures, tables, etc.). With this module, two versions of a rich media player are given: a full-featured flash version and a simplified html5 version. Another tool is also provided to ease the synchronization of your courseware with the main video.
The lathe comes with the motor and its speed controller, a 2.75-inch (70 mm) x 6-inch (152 mm) cross slide, 15-inch (381 mm) steel bed to allow 8-inch (203 mm) between centers, pulleys, belt, faceplate, lathe dog, two dead centers, three hexagonal keys, tool post, sharpened high-speed steel cutting tool, eight-foot, three-wire power cord, and instruction booklet. 041b061a72